Performance Optimization of Multi-Roller Flat Burnishing Process in Terms of Surface Properties
| 1 | Faculty of Special Equipments, Le Quy Don Technical University, Viet Nam |
| 2 | Faculty of Engineering and Technology, Nguyen Tat Thanh University, Viet Nam |
| 3 | Faculty of Mechanical Engineering, Le Quy Don Technical University, Viet Nam |
Submission date: 2022-12-14
Final revision date: 2023-02-22
Acceptance date: 2023-02-25
Online publication date: 2023-03-03
KEYWORDS
TOPICS
ABSTRACT
In the current investigation, two primary indicators, including the average roughness (AR) and Brinell hardness (BH) of the roller burnishing operation are enhanced using the optimal inputs (the spindle speed-S, feed rate-f, and depth of penetration-D). The performance measures are developed using the Kriging approach and optimal outcomes are generated by the Crow Search Algorithm (CSA). The optimal outcomes generated by the CSA of the S, f, and D were 832 rpm, 112 mm/min, and 0.12 mm, while the AR was reduced by 37.0% and the BH was increased by 29.9%, respectively. The optimal findings could be utilized in the practice for enhancing the burnished quality and to develop a professional system related to the roller burnishing operation. The Kriging-based AR and BH correlations could be used to present nonlinear experimental data. The optimizing technique could be utilized to deal with optimizing problems for different machining operations.
REFERENCES (15)
1.
STALIN JOHN M.R., BANERJEE N., SHRIVASTAVA K., VINAYAGAM B.K., 2017, Optimization of Roller Burnishing Process on EN-9 Grade Alloy Steel using Response Surface Methodology, J. Braz. Soc. Mech. Sci. Eng., 39, 30893101.
2.
PATEL K.A., BRAHMBHATT P.K. 2018, Response Surface Methodology based Desirability Approach for Optimization of Roller Burnishing Process Parameter, J. Inst. Eng. India Ser. C 99, 729–736.
3.
STALIN JOHN M.R., BALAJI B., VINAYAGAM B.K., 2017, Optimisation of Internal Roller Burnishing Process in CNC Machining Center using Response Surface Methodology, J. Braz. Soc. Mech. Sci. Eng. 39, 4045–4057.
4.
YUAN X.L., SUN Y.W., GAO L.S., JIANG S.L., 2016, Effect of Roller Burnishing Process Parameters on the Surface Roughness and Microhardness for TA2 alloy, Int. J. Adv. Manuf. Technol., 85, 1373–1383.
5.
SHANKAR E., BALASIVANANDHA PRABU S., SAMPATH KUMAR T., STALIN JOHN M.R., 2018, Investigation of TiAlN Coated Roller Burnishing on Al-(B4C)p MMC Workpiece Material, Mater. Manuf. Process., 33/11, 1242–1249.
6.
NGUYEN T.T., LE X.B., 2018, Optimization of Interior Roller Burnishing Process for Improving Surface Quality, Mater. Manuf. Process., 33/11, 1233–1241.
7.
NGUYEN T.T., 2021, Multi-Response Performance Optimization of Burnishing Operation for Improving Hole Quality. J. Braz. Soc. Mech. Sci. Eng., 43, 560.
8.
NGUYEN T.T., LE M.T., 2021, Optimization of Internal Burnishing Operation for Energy Efficiency, Machined Quality, and Noise Emission, Int. J. Adv. Manuf. Technol., 114, 2115–2139.
9.
NGUYEN T.T., NGUYEN T.A., TRINH Q.H. LE, X.B., PHAM L.H., LE, X.H., 2022, Artificial Neural Network-based Optimization of Operating Parameters for Minimum Quantity Lubrication-assisted Burnishing Process in terms of Surface Characteristics, Neural Comput. & Applic., 34, 7005–7031.
10.
DUNCHEVA G.V., MAXIMOV J.T., DUNCHEV V.P., ATANASOV T.P., CAPEK J., 2020, Single Toroidal Roller Burnishing Of 2024-T3 Al Alloy Implemented as Mixed Burnishing Process, Int. J. Adv. Manuf. Technol., 111, 3559–3570.
11.
NGUYEN T.T., NGUYEN T.A., TRINH Q.H., LE X.B., 2022, Multi-Performance Optimization of Multi-Roller Burnishing Process in Sustainable Lubrication Condition, Mater. Manuf. Process., 37/4, 407–427.
12.
PRASAD K.A., JOHN, M.R.S., 2021, Optimization of External Roller Burnishing Process on Magnesium Silicon Carbide Metal Matrix Composite using Response Surface Methodology. J. Braz. Soc. Mech. Sci. Eng., 43, 342. https://doi.org/10.1007/s40430....
13.
LE V.A., NGUYENT.T., 2022, Investigation and Optimization of MQL System Parameters in the Roller-Burnishing Process of Hardened Steel, Stroj. Vestn./J. Mech. Eng., 68/3, 155–165.
14.
HOANG TIEN D., TRUNG D.D., VAN THIEN N., NGUYEN N., 2021, Multi-Objective Optimization of the Cylindrical Grinding Process of SCM440 Steel Using Preference Selection Index Method, J. Mach. Eng., 21/3, 110–123, https://doi.org/10.36897/jme/1....
15.
DANG T.X., SON N.H., CUONG P.D., 2022. Research on Optimizing Spray Parameters for Cr3C2 - NiCr Coating Created on Alloy Steel by Plasma Spraying Technique, J. Mach. Eng., 22/4, 43–53, https://doi.org/10.36897/jme/1....
We process personal data collected when visiting the website. The function of obtaining information about users and their behavior is carried out by voluntarily entered information in forms and saving cookies in end devices. Data, including cookies, are used to provide services, improve the user experience and to analyze the traffic in accordance with the Privacy policy. Data are also collected and processed by Google Analytics tool (more).
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.